Metal Frames Partitions

Floor and Ceiling Channel

Application

Designed for securing wall studs at floor and ceiling junctions. Fixed to floor and ceiling to accommodate Gypsteel ULTRA® studs.

Dimensions in (mm)

50 x 32 x 32 x 0.5 x 3660

94 x 32 x 32 x 0.5 x 3660

72 x 32 x 32 x 0.5 x 3660

148 x 32 x 32 x 0.5 x 3660

 

'C' Stud

Application

Used as the vertical support in wall framing.

Dimensions in (mm)

92 x 34 x 36 x 0.5 x 3050 / 3660

48 x 34 x 36 x 0.5 x 3050 / 3660

146 x 34 x 36 x 0.5 x 3660

70 x 34 x 36 x 0.5 x 3050 / 3660

 

AcouStud

Application

Used as the vertical support in wall framing. This is a specialist stud for high acoustic performance.

Dimensions in (mm)

70 x 41 x 44 x 0.5 x 3050 / 3660

92 x 41 x 44 x 0.5 x 3050 / 3660

146 x 41 x 44 x 0.5 x 3050 / 3660

 

Noggin Channel

Application

Designed for horizontal support between the C-stud, helps in electrical switch fitting, fire rated partitions for preventing fires from spreading. Available length: 695/492/390

Dimensions in (mm)

48 x 40 x 0.5

70 x 40 x 0.5

92 x 40 x 0.5

 

I Stud

Application

Used for shaftwall applications, industrial partitions, independent wall lining.

Dimensions in (mm)

48 x 38 x 0.5 x 3050 / 3660

70 x 38 x 0.7 x 3050 / 3660

92 x 38 x 0.7/0.9 x 3050 / 3660

146 x 38 x 0.7/0.9 x 3050 / 3660

 

Retaining Channel

Application

Used with I-stud for fixing the board on the other side, eliminating the need to screw the board with the stud.

Dimensions in (mm)

29 x 15 x 0.5 x 3660

 

Closed Stud

Application

Used as the vertical support to replace Aluminium framings for office partitions.

Dimensions in (mm)

48X34X34X48X0.6X3660