Gyproc®
Plastering Solutions

Plastering Solutions

At Gyproc®, We understand world class products
need to be combined with world class
execution
for the best finish.

To make this happen Saint Gobain Gyproc® works with contracting partners
through a combination of onsite training (Plastershala), certification and providing
tools to ensure the customer get the best finish and productivity at site.

Services

Certified Contracting Partners

Saint-Gobain Gyproc® can recommend gypsum plastering contractors capable of executing large projects. These gypsum plastering contractors are regular users of Saint-Gobain Gyproc® plasters and have a team of trained applicators to deliver “superior quality”, “higher productivity”, “less wastages” at site and “follow safety guidelines”.

Quality checks

Saint-Gobain Gyproc® has technically equipped and trained technologists. Saint-Gobain Gyproc® technologists regularly conduct inspection during their site visits to ensure consistent quality at site. During site Inspection, technologists observe application methods followed at site and suggest improvements wherever required.

Plastershala Training module for applicators

“Plastershala” is a training provided by Saint-Gobain Gyproc® to site applicators by our trained personnel. Plastershala is conducted with prior approval from project managers at regular intervals to improve labour productivity.

Machine Spray plaster for faster work

Saint-Gobain Gyproc® also offers a special product Elite – Machine Spray suitable for mechanized application of Gypsum Plaster. Special additives in Elite – Machine Spray ensures less wastages due to anti splatter properties. Machine Spraying at site can be used in large projects for faster construction. Machine Spraying provides a smooth and consistent quality in quick time

Improving productivity & Quality

Saint-Gobain Gyproc® has variety of Plasters and supporting tools to improve productivity and ensure consistent quality. Saint-Gobain Gyproc® plasters has lower density as compared to basic stucco plaster available in the market. Saint-Gobain Gyproc® plasters are manufactured at fully automated factories to deliver consistent quality and higher setting time of 15-25 minutes, thus giving freedom to use entire bag of Saint-Gobain Gyproc® plasters without wastages.

Closer to Market

We have 3 world class manufacturing plants located strategically close to major consuming markets at Wada near Mumbai (Maharashtra), Chennai (Tamil Nadu) & Bikaner (Rajasthan). This enables us to reach most key markets spread across the West, South & North of India in 48 hours. With our extended partner network of over 1000 dealers available in every micro market in every city & town we are there at a stone's throw from your project.

Tools

Mixing Rod

Increased Productivity

Trowel

Excellent Finish

PVC Tile Skirting

Creates Uniformity | Enhances Aesthetics | Avoids Cracks | Reduces Cost of Maintenance

PVC Corner Beads

Protects corners from breaking and saves repairing cost.

PVC Inner Corner Bead

Reduces cost of maintenance I Enhances Aesthetics | Increases Durability

Application Methodology

In large projects, it is observed to have uneven walls. Best time to get it rectified is during erecting
the wall itself but there are ways to get it rectified during gypsum plastering also.

Saint-Gobain Gyproc® plasters are applied directly over various surfaces and executed in 9 Easy Steps:

Clean and Wet

Clean and pre wet the
wall before application

Mixing

Mix Powder in water
(in the ratio of 100:80)
& not vice versa

Blending

Mix thoroughly to
make a uniform
smooth slurry

Level Mark

Put Bull mark at every 4
feet and ensure vertical
level by using plumb

Reference Mixing

By using aluminum box plate
(bottom patti) on bull marks, fill
the gap with Gyproc® plasters

Application

Apply fresh material
paste on wall with the
help of trowel

Levelling

Level the material paste
on the wall with the help
of aluminum box plate

Finishing

Mix thin slurry & apply on
levelled surface with trowel
to get smooth finish

Drying

Leave the wall to
dry for 2-3 days

Method of Application

Make the surface clean,
free of debris and oil. Chasing
should be completely filled

Apply the first layer of basic
coat over the entire surface

Apply the mesh from the
top to bottom of the wall by
pressing it into the first layer
of the base coat (starting
from the centre then out to
the side).

Apply the rest of the base
coat keeping the mesh
sandwiched between the two
coats

Apply at least 3 mm of upper
coat material on top of the
base coat

Three Easy Steps to Use Gyproc® BOND it

STEP 1

Open and stir the
contents

STEP 2

Apply with a paint
brush

STEP 3

Dry for 24 hrs. Surface
ready for plastering